Toshiba e-STUDIO355 - Paper Jam on the Paper Transport Path

1 TROUBLESHOOTING FOR THE HARDWARE
20 Clearing a Paper Jam
4
Lower the transfer unit carefully and then close the automatic duplexing unit.
 Paper jam on the paper transport path
Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic duplexing
unit.
This could injure you.
4
Close the automatic duplexing unit.
3
Remove the jammed paper while lifting up the transfer
unit.
1
2
1
Open the automatic duplexing unit.
2
Remove the jammed paper.
Be sure not to touch the photoconductive drum when releasing the
jammed paper.
3
Open the transport guide of the paper feeding area
and check if any paper is jammed under this guide.
Clear the paper if there is any.