1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam 19
1 TROUBLESHOOTING FOR THE HARDWARE
Paper jam in the automatic duplexing unit
Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic duplexing
unit.
This could injure you.
2
Pull out the jammed paper in the bypass tray.
3
Place paper on the bypass tray and then move the
paper holding lever toward the equipment.
1
Open the automatic duplexing unit.
2
Remove paper jammed on the paper transport path
above the fuser unit. (Only for e-STUDIO355/455)
To Next Page
Loading...
