Toshiba e-STUDIO355 - Refilling Saddle Stitch Unit Staples

1.TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples 67
1 TROUBLESHOOTING FOR THE HARDWARE
If the message “Check staple cartridge” remains, repeat the procedure above from steps 1 to 10.
 Refilling saddle stitch unit staples
When the staples of the stapler in the Saddle Stitch Finisher MJ-1024 have run out, refill staples following the procedure
below.
9
Close the staple cartridge unit cover.
10
Connect the finisher to the equipment.
Move the finisher slowly toward the equipment, placing both of your
hands on the front and the back of the finisher.
1
Open the front cover of the finisher.
2
Slowly pull out the saddle stitch unit.