e-STUDIO520/600/720/850 FIRMWARE UPDATING March 2005 © TOSHIBA TEC
6 - 16
[C] Display during the update
Update is performed in parallel as shown in the transition diagram below.
Fig.6-15
Below is an example of the changes of the LCD screen during update.
Note that the screen order may be different from the actual one, because a parallel update is performed
in the process.
Item Selection Screen for Update
0. OS Update
1. UI Data Update
2. System Firmware Update
［System ROM］
4. PFC Firmware Update
5. Engine Firmware Update
Update Completed
［Laser ROM］
［PFC ROM］
［Engine ROM］
6. Scanner Firmware Update
［Scanner ROM］
3. LSR Firmware Update
05/05
To Next Page
Loading...
