e-STUDIO520/600/720/850 FIRMWARE UPDATING March 2005 © TOSHIBA TEC
6 - 18
When the [System ROM]-[System Firmware
Update] has been updated, “SysFirm
Update…Completed” is displayed.
When the [Scanner ROM] has been updated,
“Scanner Firm Update..Flash Update” is
changed to “Scanner Firm Update..Completed”.
When the [Laser ROM] has been updated,
“LSR Firm Update…Completed” is displayed
and the [PFC ROM] update will start.
When the [PFC ROM] has been updated, “PFC
Firm Update…Completed” is displayed and the
[Engine ROM] update will start.
05/05
To Next Page
Loading...
