Toshiba E-STUDIO600 - Page 536

e-STUDIO520/600/720/850 POWER SUPPLY UNIT March 2005 © TOSHIBA TEC
7 - 2
(2) +24 V
+24VA : CN402 Pin 1
Output to the LGC board
+24VB : CN402 Pin 2
Output to the LGC board
+24VC : CN402 Pin 3
Output to the LGC board, external LCF (via LGC board)
+24VD : CN403 Pin 1
Output to the PLG board
+24VE : CN404 Pin 3
Output to the SLG board
+24VF : CN409 Pins 3 and 4
Output to the finisher
+24VG : CN404 Pins 5 and 7
Output to the ADF board (RADF)
(3) +36 V
+36VA : CN402 Pin 7
Output to the LGC board
+36VB : CN402 Pin 8
Output to the LGC board
+36VC : CN403 Pin 3
Output to the PLG board
+36VD : CN404 Pin 1
Output to the SLG board
Output voltage by the type of connector
Main switch line
Cover switch line
Connector Destination Voltage
CN405 For the SYS board +3.3VA, +5.1VA, +5.1VB, +12VA, +12VB
CN406 For the LGC board, external LCF (via LGC board),
finisher (via LGC board)
+3.3VD, +5.1VC, +12VE
CN407 For the PLG board +3.3VB, +5.1VE, +5.1VF, +12VC
CN408 For the SLG board +3.3VC, +5.1VD, +12VD
CN409 For the finisher +5.1VG
CN410 For the FAX board +12VF
Connector Destination Voltage
CN402 For the LGC board, external LCF (via LGC board) +24VA, +24VB, +24VC, +36VA, +36VB
CN403 For the PLG board +5.1VH, +24VD, +36VC
CN404 For the SLG board, ADF board (RADF) +24VE, +24VG, +36VD
CN409 For the finisher +24VF