March 2005 © TOSHIBA TEC e-STUDIO520/600/720/850 DATA CLONING with USB STORAGE DEVICE
9 - 3
9
<User Data Backup>
(5) Turn the power ON while pressing the [5] and [9] button simultaneously.
The screen to select the backup/restore items is displayed.
Fig.9-2
(6) Select the items to be performed with the digital keys.
• In case of backup, select one of the following items.
<Backing up User data>
Select "1: User Data Back Up".
<Backing up Setting item>
Select "3: Setting Back Up".
<Backing up SRAM data>
Select "5: SRAM Data Back Up".
Note: Note:
After the item is selected with the digital keys, displaying the next menu may take a long time.
(7) Press the [1] button.
The screen to select the user data backup item is displayed. In this screen, the items to be
backed up are shown after the mark "*". (The items "4", "5" and "6" are selected in the screen by
default.)
Fig.9-3
05/11
To Next Page
Loading...
