e-STUDIO520/600/720/850 DATA CLONING with USB STORAGE DEVICE March 2005 © TOSHIBA TEC
9 - 6
<Setting Backup>
(12) Connect the USB storage device to the USB connector (host) on the SYS board.
(13) Turn the power ON while pressing the [5] and [9] button simultaneously.
The screen to select the backup/restore items is displayed.
Fig.9-7
Note: Note:
After the item is selected with the digital keys, displaying the next menu may take a long time.
(14) Press the [3] button.
The screen to select the setting backup item is displayed. In this screen, the items to be backed
up are shown after the mark "*". (No items are selected in the screen by default.)
Fig.9-8
05/11
To Next Page
Loading...
