e-STUDIO520/600/720/850 DATA CLONING with USB STORAGE DEVICE March 2005 © TOSHIBA TEC
9 - 12
<User Data Restore>
(3) Turn the power ON while pressing the [5] and [9] button simultaneously.
The screen to select the backup/restore items is displayed.
Fig.9-16
(4) Select the items to be performed with the digital keys.
• In case of restore, select the following items.
<Restoring User data>
Select "2: User Data Restore".
<Restoring Setting item>
Select "4: Setting Restore".
<Restoring SRAM data>
Select "6: SRAM Data Restore".
Note: Note:
After the item is selected with the digital keys, displaying the next menu may take a long time.
(5) Press the [2] button.
The screen to select the user data restore item is displayed. In this screen, the items to be
restored are shown after the mark "*". (The items "4", "5" and "6" are selected in the screen by
default.)
Fig.9-17
05/11
To Next Page
Loading...
