e-STUDIO520/600/720/850 ERROR CODE AND SELF-DIAGNOSTIC MODE March 2005 © TOSHIBA TEC
2 - 42
Test print pattern in Adjustment Mode (05)
Operation: One test print is printed out when the [FAX] button is pressed after the code is keyed in at
Standby Screen.
Code Types of test pattern Remarks
1 Grid pattern Refer to 3.2.3 Printer related adjustment
3 Grid pattern (Duplex printing) Refer to 3.2.3 Printer related adjustment
9 Gamma adjustment pattern (dither) Refer to 3.2.2 Paper alignment at registration
roller
10 Gamma adjustment pattern (error diffusion) Refer to 3.2.2 Paper alignment at registration
roller
90 Duplex test copy (single->duplex) Duplex printing from the specified drawer is per-
formed.
Any number of originals can be used for this
test.
91 Duplex test copy (single->single) Duplex scanning from the RADF is performed
and then single-sided printing from the specified
drawer is performed.
Any number of originals can be used for this
test.
92 Duplex test copy (duplex->duplex) Duplex scanning from the RADF is performed
and then duplex printing from the specified
drawer is performed.
Any number of originals can be used for this
test.
To Next Page
Loading...
