1.1 Functions and features of PF611A / PF612A
PROFIBUS is an international standard network developed by Siemens that is certified by
German industrial Standards (DIN19245), European Standards (EN50170), and
International Standards (IEC-61158). At the actual application level, there are more than
1,100 companies participating in the user group with approximately 300 vendors providing
approximately 2,000 different products in the European and North American market.
PROFIBUS is classified into DP, FMS, and PA which respectively applies to high-speed
remote I/O, inter-controller message communication, and instrumentation applications. The
PF611A and PF612A supports PROFIBUS-DP, which is the most popular among these.
The PROFIBUS-DP module enhances connectability by providing PROFIBUS connection to
integrated controllers and unified controller nv series type1 light.
The product lineup is as follows:
The following module is used as the PROFIBUS-DP transmission controller for this module.
- Master module (PF611A):
HMS AnyBus PROFIBUS-DP Master
- Slave module (PF612A):
HMS AnyBus PROFIBUS-DP Slave
To Next Page
Loading...
