Chapter 3 Operation, Function and Setup
6F8C1872
PF611A / PF612 is 1 slot width.
Fix to the base unit with the top and bottom lock levers and the top screwed (M4 screw).
(1) Module insert in slot guide of base unit.
(2) Hold the top and bottom of the module,
insert vertically on the base unit.
Make sure you hear a sound when the top and
bottom lock levers are attached to the base unit.
(3) Insert the M4 screw through the hole on the top,
and securely attach the base unit and module with
the screw.
The image is a representative of the same product type.
Make sure that the power is off before installing /
removing the device.
There is a risk of electric shock.
Please install and wire after removing static
electricity from human body.
Product may be damaged by the static electricity
charged on the human body.
Please use the + driver.
Please use the screwdriver matched the screw to
prevent damage to the screw.
To Next Page
Loading...
