Chapter 7 Maintenance and Inspection
6F8C1872
Do not touch the inside of the product for safety.
There is a risk of electric shock.
When touching the product for cleaning, remove static
electricity from human body.
static electricity charged may cause damage the product.
When cleaning, do not change the switch setting of the
product, do not stress the cable.
Stress on cables may cause malfunction or accident.
Immediately stop using if an abnormality occurs.
If an error occurs, such as when the power cannot be turned on,
stop using the product and contact our service representative.
Module insertion and removal should be done within 50
times after starting use
Failure to do so may cause failure or characteristic degradation.
It may cause equipment failure or malfunction.
7.1.1 Daily inspection
Perform the following items for daily inspection.
Turn off the power if there is smoke or strange odor.
It might cause fire or electric shock.
Do daily inspections, periodic inspections, and cleaning to keep the system normal and prevent unnecessary troubles.
To Next Page
Loading...
