Toshiba RBC-AWSU52-UL - Louver Swing and Lock Settings

–21–
Owner’s Manual
■2. Louver setting
(Selecting the type of swing or fixing the louvres)
NOTE
This function may not be available, depending on the model of the indoor unit.
Swing type
You can select from 3 types of swing operation: “Standard”, “Dual”, or “Cycle”.
NOTE
• For models that “Louver setting” is not available, the message “No function” is displayed.
• Press [ Return] to not fix the changes, so conditions are as before changes, and return to the “Louver setting” screen.
• For group connections, refer to <When multiple indoor units are connected as a group (group connection)>. (Page 57)
1 In “Menu” (Page 17), select “Louver
setting”, and press [ Set/Fix]
2 Press [ ] and [ ] to select “Swing
type”, and then press [ Set/Fix]
3 In the “Swing type” screen, press [ ] and
[ ] to select a mode
 Regarding “Swing type”, refer to the Owner’s Manual
of the indoor unit.
4 Press [ Set/Fix]
 Return to the “Louver setting” screen.
5 Press [ Return]
 “ ” is displayed.
 When doing group connections, the screen for
selecting units is displayed, so press [ Return] to
display “ ”.