Toshiba RBC-AWSU52-UL - Condition Setting (Setting 1-Day Operation Schedules)

–29–
Owner’s Manual
Condition setting (Setting 1-day operation schedules)
You can set a 1-day operation schedule.
In 1 schedule (1-day), you can set up to 8 patterns (operate, start time, temperature setting).
▼ every day (Same schedule every day, regardless of the day of the week)
Operation can be done at the same schedule every day, regardless of the day of the week.
1 In the “Schedule timer” screen, press [ ]
and [ ] to select “Condition setting”, and
then press [ Set/Fix]
2 Press [ ] and [ ] to select “every day”,
and then press [ Menu]
 Press [ ] and [ ] to check the current settings.
The settings are shown in 8 patterns.
3 Press [ Set/Fix]
4 Press [ ] and [ ] to select “--” (not set),
“ON”, “OFF”, or “Auto”
5 Push [ ] to select the starting time and
the set temperature
 If “--” (not set) is displayed, the time and temperature
cannot be set.
6 Press [ ] and [ ] to change the time and
temperature settings
 Press [ ] to switch to an item you want to change.
7 Press [ ] to move to the next pattern
 Up to a total of 8 patterns can be set.
 Do the settings in steps
4 to 6 to set each pattern.
8 Press [ Set/Fix]
 A screen to confirm changes appears.
9 Press [ Set/Fix]
 Return to the “Schedule timer” screen.