–23–
Owner’s Manual
■3. Timer (Setting a timer to start or stop operation)
Selecting a timer type
About “Off timer” and “On timer” operations
• “Off timer” and “On timer” are enabled for only 1 time.
• “Off timer” and “On timer” do not operate in the following conditions.
When “Off timer” and “On timer” are disabled, during function settings, during central control (if “ON/OFF” is prohibited)
• When 2 remote controllers are connected, settings cannot be done on the “Follower remote controller”.
• The setting range of “Off timer” and “On timer” is a minimum of 30 minutes and a maximum of 168 hours (7 days).
• Press [ Return] to not fix the changes, so conditions are as before changes, and return to the “Timer” screen.
• If there is a power outage, the “Off timer” and “On timer” settings are cancelled. (They become “OFF”.)
• When “Off timer” and “On timer” are “ON”, then “ ” is displayed in the detailed display.
1 In “Menu” (Page 17), select “Timer”, and
press [ Set/Fix]
2 Press [ ] and [ ] to select the timer you
want to set
3 Press [ Set/Fix]
To Next Page
Loading...
