Toshiba RBC-AWSU52-UL - Return Back

–42–
Owner’s Manual
EN
Return back
Even if you change the set temperature, it will return to the “Return temp.(Cool)” or “Return temp.(Heat)” at “Return
time” that has been set previously.
NOTE
When 2 remote controllers are connected, settings cannot be done on the “Follower remote controller”.
1 In the “Energy saving” screen, press [ ]
and [ ] to select “Return back”, and then
press [ Set/Fix]
2 Press [ ] and [ ] to select “Return
back”
3 Press [ ] to select “ON”
 If you select “OFF”, the setting is not done.
4 Press [ ] and [ ] to select “Return
time”, and then press [ ] and [ ] to
change the time
 You can set from 10 to 120 minutes in 10 minute
increments.
5 Press [ ] and [ ] to select “Return
temp.(Cool)” or “Return temp.(Heat)”, and
then press [ ] and [ ] to change the set
temperature
6 Press [ Set/Fix]
 Return to the “Energy saving” screen.