Toshiba RBC-AWSU52-UL - Page 41

–40–
Owner’s Manual
EN
▼ Energy saving time settings
▼ Energy saving schedule
NOTE
• The saving ratio for “Always” is the value set for “Energy saving ratio”.
• The times set for the energy saving schedule can be set from 0:00 to 23:50 in 10 minute increments.
• The saving ratios for the energy saving schedule can be selected from “75%”, “50%”, or “0%(OFF)”.
* “75%” is the value set for “Energy saving ratio”.
• Before doing “Energy saving schedule”, do “Clock”. (Page 46)
• The saving ratio and operating power level display may not be in proportion depending on the operating status.
• If different saving ratios are set in the same time period, the lower saving ratio is used for operations.
1 In the “Energy saving operation” screen,
press [ ] and [ ] to select “Energy
saving time”, and then press [ Set/Fix]
2 Press [ ] and [ ] to select “Always” or
“Schedule”
3 Press [ Set/Fix]
 Return to the “Energy saving operation” screen.
1 In the “Energy saving operation” screen,
press [ ] and [ ] to select “Energy
saving schedule”, and then press [ Set/
Fix]
 If the clock is not displayed, go to the “Clock” screen.
(Page 46)
2 Press [ ] and [ ] to change the time and
saving ratio
 Press [ ] and [ ] to switch to an item you want
to change.
3 Press [ Set/Fix]
 Return to the “Energy saving operation” screen.
Always
Sets the same saving ratio for the
entire day.
Schedule
Sets saving ratios, and whether to
do saving, for each hour.