User's Manual Introduction 1-7
Version
1
Last Saved on 19/01/00 17:28
Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as
IM_267UK
Power on password
Two levels of password security are available:
supervisor and user. This feature prevents
unauthorised access to your computer.
Instant security
A hotkey function blanks the screen and disables
the computer providing quick and easy data
security.
Panel power off
A microprocessor in the computer’s intelligent
power supply detects the battery’s charge and
calculates the remaining battery capacity. It also
protects electronic components from abnormal
conditions, such as voltage overload from an
AC adaptor. You can monitor remaining battery
capacity in the
Battery remaining
item of the
Power Save Modes
window in Power Saver.
Low battery
automatic
hibernation
When battery power is exhausted to the point
that computer operation cannot be continued the
system automatically enters Hibernation and
shuts down.
Heat dispersal
To protect from overheating, the CPU has an
internal temperature sensor. If the computer’s
internal temperature rises to a certain level, the
cooling fan is turned on or the processing speed
is lowered. You can select whether to control the
CPU temperature by turning on the fan first, then
if necessary, lowering the CPU speed. Or, by
lowering the CPU speed first, then if necessary,
turning on the fan. Use the
Fan
item of the Power
Saver Utility.
Hibernation
This feature lets you turn off the power without
exiting from your software. The contents of main
memory is saved to the hard disk, when you turn
on the power again, you can continue working
right where you left off. Use the
Hibernate
window of
Power Management Properties
to
enable or disable
Hibernate
support. To enter
Hibernation mode, click Start, then click
Hibernate. Also, in the
System Power Mode
of
the
Power Saver utility,
two Hibernate settings
are available:
When I press the power button
and
When I close the lid
.
You cannot use Hibernation, if the Windows 98 Drive Converter converts
the file allocation table to FAT 32 or if you use a file compression utility.
To Next Page
Loading...
