User's Manual Setup and Password Security 7-9
Version
1
Last Saved on 19/01/00 17:28
Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as
IM_267UK
Second page of TSETUP
Configuration
This option allows you to set the configuration method.
I/O Ports
This option lets you specify the settings for the serial, built-in modem and
parallel ports. Use the Device Manager to change these settings. Refer to
your Windows 98 documentation.
Serial
This option allows you to set the COM level for the serial port.
The serial port interrupt request level (IRQ) and I/O port base address for
each COM level is shown below.
COM level I/O address Interrupt level
COM1 3F8H 4
(Default)
COM2 2F8H 3
COM3 3E8H 4
COM3 3E8H 5
COM3 3E8H 7
COM4 2E8H 3
COM4 2E8H 5
COM4 2E8H 7
Not used
(Disables port)
Others
(Other settings made automatically by
plug-and-play operating systems)
If the setting for the serial port is the same as that for the Built-in Modem
or Parallel port, the port(s) is set to
Not Used
or disabled.
To Next Page
Loading...
