Toshiba Satellite 2670 series - Temporarily Using Normal Keyboard (Overlay On); Temporarily Using Overlay (Overlay Off)

User's Manual The Keyboard 5-7
Version
1
Last Saved on 19/01/00 17:28
Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as
IM_267UK
Numeric mode
To turn on the Numeric mode, press
Fn + F11
(
Numeric mode
indicator
lights). Now try numeric data entry using the keys in the following
illustration. Press
Fn + F11
again to turn off the overlay.
Home
PgUp
!
"
2
$%
68
()&
+
PgDn
EndShift
Del
Caps
Lock
Alt AltCtrl
QW RTYUI OP
{}
E
~
ASDFGHJKL
:
@
?
>
<
MNVCXZB
^
∗
-
Ins
;
1345790
=
[]
#
,
/
Fn
BkSp
_
\
Enter
`
´
.
Esc
Prt Sc
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
Sys Req
Pause
F11 F12
Break
Shift
8
()&
UI OP
JKL
:
?
>
M
∗
;
790
/
.
456 -
123
0
7
Ins Del
Home PgUp
End PgDn
89
. /
+
∗
456 -
123
0
7
Ins Del
Home PgUp
End PgDn
89
. /
+
∗
The numeric keypad overlay
Temporarily using normal keyboard (overlay on)
While using the overlay, you can temporarily access the normal keyboard
without turning off the overlay:
1.
Hold
Fn
and press any other key. All keys will operate as if the overlay
were off.
2.
Type upper-case characters by holding
Fn + Shift
and pressing a
character key.
3.
Release
Fn
to continue using the overlay.
Temporarily using overlay (overlay off)
While using the normal keyboard, you can temporarily use the keypad
overlay without turning it on:
1.
Press and hold down
Fn
.
2.
Check the keyboard indicators. Pressing
Fn
turns on the most recently
used overlay. If the
Numeric mode
indicator lights, you can use the
overlay for numeric entry. If the
Arrow mode
indicator lights, you can
use it for cursor and page control.
3.
Release
Fn
to return to normal keyboard operation.