3 Tests and Diagnostics 3.22 Log Utilities
2. The error information displayed on the screen can be manipulated by the following
number keys:
1 scrolls the display to the next page.
2 scrolls the display to the previous page.
3 returns to the Diagnostic Menu.
4 erases all error log information in RAM.
5 outputs the error log information to a printer.
6 reads the log information from a floppy disk.
7 writes the log information to a floppy disk.
3. In the case of “error retry OK”, a capital “R” will be placed at the beginning of the error
status. However, it is not added to the error count.
3-58 Satellite A20 Maintenance Manual (960-444)
To Next Page
Loading...
