4 Replacement Procedures 4.24 Speakers
4.24 Speakers
Removing the Speakers
To remove the speakers, follow the steps below and refer to figures 4-34 and 4-35.
1. Lay the top cover and display assembly face down and remove the insulator.
2. Remove the following screws securing the side covers.
• M2.5×6 FLAT HEAD screw ×4
M2.5
×
6 FLAT HEAD screw
Speaker cables
Tape Tape
Speaker (Right)
Speaker (Left)
Figure 4-34 Removing the Speakers
4-62 Satellite A20 Maintenance Manual (960-444)
To Next Page
Loading...
