4.26 Display Mask 4 Replacement Procedures
4.26 Display Mask
Removing the Display Mask
To remove the display mask, follow the steps below and refer to figures 4-37 and 4-38.
1. Remove the two mask seals at the lower part of the display mask.
2. Remove the following screws securing the display mask.
• M2.5×6 FLAT HEAD screw ×2
M2.5×6 FLAT HEAD screw
Mask seal
Figure 4-37 Removing the Display mask (1)
3. Release the latches on the display mask from the upper side of the display.
Satellite A20 Maintenance Manual (960-444) 4-65
To Next Page
Loading...
