Toshiba Satellite A20 Series - Front Membrane ASSY

4.16 Front Membrane ASSY 4 Replacement Procedures
4.16 Front Membrane ASSY
Removing the Front Membrane ASSY
To remove the front membrane ASSY, follow the steps below and refer to figure 4-26.
1. Disconnect the front membrane cable from PJ3260 on the system board.
2. Remove the following screws securing the front membrane holder.
• M2.5×4 FLAT HEAD screw ×2
3. Remove the front membrane holder and the front membrane ASSY.
PJ3260
M2.5×4 FLAT HEAD screw
Front membrane ASSY
Front membrane holder
Front membrane cable
Figure 4-26 Removing the Front membrane ASSY
Satellite A20 Maintenance Manual (960-444) 4-47