4 Replacement Procedures 4.4 Optional SD Card
4.4 Optional SD Card
Removing an Optional SD Card
To remove an SD card (option), follow the steps below and refer to figure 4-3.
CAUTION: Before you remove an SD card, refer to the card's documentation and to
your operating system documentation for proper procedures and precautions.
1. Turn the computer face up.
2. Push the SD card in (indicated as “1” in the figure below) and release it to pop the
card out slightly.
3. Grasp the SD card and pull it out (indicated as “2” in the figure below).
SD card
Figure 4-3 Removing an SD card
Installing an Optional SD Card
To install an SD card (option), follow the steps below and refer to figure 4-3.
1. Insert an SD card.
2. Push it carefully to ensure a firm connection.
4-12 Satellite A20 Maintenance Manual (960-444)
To Next Page
Loading...
