4.27 FL Inverter 4 Replacement Procedures
4.27 FL Inverter
Removing the FL Inverter
To remove the FL inverter, follow the steps below and refer to figure 4-39.
1. Remove the following screw securing the FL inverter.
• M2×6 SUPER FLAT screw ×1
2. Remove the insulator and disconnect the FL cable from the FL inverter.
3. Disconnect the HV cable from the FL inverter.
4. Remove the FL inverter.
M2×5 SUPER FLAT screw
HV cable
FL inverter
FL cable
Figure 4-39 Removing the FL inverter
Satellite A20 Maintenance Manual (960-444) 4-67
To Next Page
Loading...
