Toshiba Satellite A20 Series - Top Cover with Display Assembly

4 Replacement Procedures 4.14 Top Cover with Display Assembly
4.14 Top Cover with Display Assembly
Removing the Top Cover with Display Assembly
To remove the top cover with display assembly, follow the steps below and refer to figures
4-23 and 4-24.
1. Turn the computer face down, and remove the following 24 screws:
• M2.5×6 FLAT HEAD screw ×11
• M2.5×20 BIND screw ×8
• M2.5×4 FLAT HEAD screw ×5
20
20
20
20
20
20
20
20
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
PJ8770
Sub fan cable
Figure 4-23 Removing the Display assembly
4-42 Satellite A20 Maintenance Manual (960-444)