4 Replacement Procedures 4.12 Wireless LAN Card
3. Disconnect the wireless LAN antenna cables (black and white) from the wireless
LAN card using an antenna coaxial cable disconnector.
PJ2200
Wireless LAN card
Wireless LAN antenna cables
(black and white)
Keyboard insulator
(black)
Figure 4-20 Removing the Wireless LAN card
4. Push the wireless LAN card lock latches outward to release the wireless LAN card. It
will pop up to about a 45-degree angle.
5. Disconnect the wireless LAN card from PJ2200 on the system board. Be careful not
to damage the connector.
4-38 Satellite A20 Maintenance Manual (960-444)
To Next Page
Loading...
