4 Replacement Procedures 4.29 Wireless LAN Antenna/Bluetooth Antenna/Display Cover
4. Turn the display cover face down and remove the insulator.
5. Remove the following screws securing the cable hold plate and cable earth plate.
• M2.5×6 TAPPING screw ×2
Cable hold plate
2.5×6 TAPPING screw
Cable earth plate
Figure 4-45 Removing the Cable hold plate/Cable earth plate
6. Remove the cable hold plate first. Then remove the cable earth plate.
4-76 Satellite A20 Maintenance Manual (960-444)
To Next Page
Loading...
