4 Replacement Procedure 4.30 Fluorescent Lamp
4. Stick the outside tape and install the cover shield.
1) Stick the tape shield and adhesive tape to fix the top case.
NOTE: Be careful not to apply excessive force to the top case.
2) Install the cover shield (C).
NOTE: Be careful not to apply excessive force to the control PCB.
CAUTION: Wear anti-static gloves to prevent circuit damage to the source
PCB.
3) Install the cover shield (G).
NOTE: Be careful not to apply excessive force to the gate TCP.
4) Stick the adhesive tape to fix the B/L wire.
4-92 Satellite A20 Maintenance Manual (960-444)
To Next Page
Loading...
