Toshiba Satellite A20 Series - Page 299

4 Replacement Procedure 4.30 Fluorescent Lamp
4.30.2 Replacing the 15.0-inch XGA Samsung Fluorescent Lamp
Disassembling the 15.0-inch XGA Samsung Fluorescent Lamp
To disassemble the 15.0-inch XGA Samsung fluorescent lamp, follow the steps below and
refer to figures4-58 to 4-65.
1. Remove the PCB cover.
NOTE: When removing the PCB cover, be careful not to damage the COF.
PCB cover
Figure 4-58 Replacing Samsung fluorescent lamp (XGA) (1)
4-94 Satellite A20 Maintenance Manual (960-444)