4 Replacement Procedures 4.30 Fluorescent Lamp
6. Turn the backlight unit (H) removed face down and remove the two screws (D) and
lamp cover (J).
NOTE: Be careful not to scratch or soil the sheets.
Screw loosening torque: 1.2kg
•
cm
(H) Backlight unit
(J) Lamp cover
(D) Screw
(D) Screw
Figure 4-73 Replacing Sharp fluorescent lamp (XGA) (7)
4-110 Satellite A20 Maintenance Manual (960-444)
To Next Page
Loading...
