3 Tests and Diagnostics
3.3 ACIN Test
Please insert adopter then run this program. This subtest checks if the power port works
properly.
This chapter shows how to use the Diagnostics to test the ACIN functions.
3.3.1 Plug in the power test program will display PASS
3.3.2 Unplug the power to test the program will show Fail.
If it fails in a test item, press “Ctrl+C” and “Y” back to main menu.
Satellite U500/PORTEGE M900D/Dynabook Maintenance Manual [CONFIDENTIAL] 3-13
To Next Page
Loading...
