4 Replacement Procedures
4.13 Bluetooth
Removing the Bluetooth
To remove the Bluetooth, follow the steps below and refer to Figures 4-24 to 4-26.
1. Tear one piece of tape that fixing the Bluetooth cable and remove 2 screws on the
Bluetooth cover.
• M2×3L FLAT HEAD screw ×2
2. Take the Bluetooth cover and Bluetooth out of the system.
Figure 4-24 Removing the Bluetooth Bracket
Figure 4-25 Removing the Bluetooth
Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D Maintenance Manual 4-43
To Next Page
Loading...
