4 Replacement Procedures
4.10 Top cover
Removing the Top cover
To remove the Top cover, follow the steps below and refer to Figures 4-18 to 4-20.
1. Remove the following screws securing the bottom case.
• M2×5L FLAT HEAD screw ×11
• M2.5×5L FLAT HEAD screw ×2
• M2×7L FLAT HEAD screw ×1
• M2×3L FLAT HEAD screw ×4
Figure 4-18 Removing the screws on the bottom case
4-34 Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D Maintenance Manual
To Next Page
Loading...
