4 Replacement Procedures
4.25 LCD unit/FL inverter
Removing the LCD unit/FL inverter
To remove the LCD unit/FL inverter, follow the steps below and refer to Figures 4-45 to 4-
49.
1. Remove the following screws securing the LCD bezel.
• M2×5L (K) screw ×4
2. Remove the LCD bezel as arrow shown while releasing the latches.
Figure 4-45 Removing the LCD bezel
3
2
2
1
Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D Maintenance Manual 4-73