4 Replacement Procedures
4.23 DC-IN Cable
Removing the DC-IN cable
To remove the DC-IN cable, follow the steps below and refer to Figure 4-41 to 4-42.
1. Remove the following screw securing the DC-IN cable.
• M2×4L FLAT HEAD screw ×1
2. Remove the DC-IN cable Bracket and DC-IN cable from the bottom case.
Figure 4-41 Removing the DC-IN cable Bracket
Figure 4-42 Removing the DC-IN cable
4-68 Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D Maintenance Manual
To Next Page
Loading...
