Toshiba Satellite U500 - Sound Troubleshooting; Procedure 1 Diagnostic Test Program Execution Check; Procedure 2 Connector Check

2 Troubleshooting Procedures
2-42 [CONFIDENTIAL] Satellite M500D/M505D/M507D Maintenance Manual
2.12 Sound Troubleshooting
This section describes how to determine if the computer’s sound functions are functioning
properly. Perform the steps below starting with Procedure 1 and continuing with the other
procedures as required.
Procedure 1: Diagnostic Test Program Execution Check
Procedure 2: Connector Check
Procedure 3: Replacement Check
Procedure 1 Diagnostic Test Program Execution Check
Insert the Sound test program in the USB key, turn on the computer and run the test. Refer to
Chapter 3, Tests and Diagnostics, for details.
If an error is detected, go to Procedure 2.