4 Replacement Procedures
Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D Maintenance Manual 4-33
To install the keyboard, follow the steps below and refer to Figures 4-14 to 4-17.
1. Place the keyboard facedown on the top cover.
2. Connect the keyboard flexible cable and the LED cable on the main board.
3. Turn the keyboard face up and set it in place.
4. Secure the keyboard with two screws on the top case.
• M2×2L FLAT HEAD screw ×2
5. Make sure that there is no gap between the keyboard and the edge of the top cover.
6. Place the keyboard around on the top case
7. Secure the keyboard around with two screws on the bottom case.
• M2×2.5L FLAT HEAD screw ×2
To Next Page
Loading...
