3 Tests and Diagnostics
3.14 STORE Test [CD/DVD-ROM TEST]
This Program will test if the CD/DVD-ROM works properly, please insert test CD before
test.
This chapter shows how to use the Diagnostics to test the ODD functions.
3.14.1. Diagnostic name: PSATA.EXE
3.14.2. Principle and how to use:
a. The PSATA diagnostic consists of the following functions.
CD/DVD type , CD/DVD F/W.
Command line:
psata -d 3 -rep _ /cm "TSSTcorpCDW/DVD_TS-L462D"
Check the Secondary master IDE device and check if the device name is the same as
“TSSTcorpCDW/DVD_TS-L462D.”
psata -d 3 -rep _ /cf "TO01"
Check the Secondary master IDE device and check if the device is F/W then check if the
F/W version is same as “TO01.”
b. Type “PSATA.exe /?” in the Free Dos prompt and you can see more details in the
command line to help you check related information.
3
-30 [CONFIDENTIAL] Satellite U500/PORTEGE M900D/Dynabook Maintenance Manual
To Next Page
Loading...
