4 Replacement Procedures
4-30 Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D Maintenance Manual
Installing the Optical Disc Drive module
To install the Optical Disc Drive module, follow the steps below and refer to Figures 4-12
and 4-13.
1. Set the ODD bracket and secure it with the following screws.
• M2×2.5L FLAT HEAD screw ×2
2. Insert the Optical Disc Drive module firmly into the computer to connect it to the
connector on the main board.
3. Secure one screw as follows. (The Optical Disc Drive is latched.)
• M2×3L FLAT HEAD screw ×1
To Next Page
Loading...
