4 Replacement Procedures
4-40 Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D Maintenance Manual
Installing the Touch pad board
To install the touch pad button, follow the steps below and refer to Figures 4-21 and 4-22.
1. Install the touch pad board to the slot and secure it with 2 screws.
• M2×3L FLATHEAD screw ×2
2. Connect the FPC cable that connecting the touch pad board with the touch pad,
connect the touch pad board FPC and paste one piece of tape to fix it.
To Next Page
Loading...
