4 Replacement Procedures
Installing the Fan
To install the fan, follow the steps below and refer to Figure 4-36 and 4-37.
1. Apply new thermal pad on the fan as shown in the following figure. Stick the thermal
pad on fan follow the mark. (Be sure to clean off all old pad before applying new
thermal pad).
Figure 4-37 Apply new thermal pad on the fan
H000013120
2. Install the fan.
3. Secure the fan with the following screws and connect the cable that connecting the
fan cable with motherboard.
• M2×5L FLAT HEAD screw ×3
4-62 Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D Maintenance Manual
To Next Page
Loading...
