2 Troubleshooting Procedures
Satellite M500/M505/M507 Maintenance Manual [CONFIDENTIAL] 2-23
Procedure 3 Replacement Check
The main board connectors may be disconnected. Disassemble the computer following the
steps described in Chapter 4, Replacement Procedures and perform Check 1.
Check 1 Visually check for the following:
a) Cracked or broken connector housing
b) Damaged connector pins
If their connectors are in good condition, but there is still a problem, go to Check
2.
Check 2 The main board may be damaged. Replace the main board with a new one
following the steps described in Chapter 4, Replacement Procedures.
To Next Page
Loading...
