2 Troubleshooting Procedures
If any of the connections are loose, reconnect firmly and repeat Procedure 1. If
there is still an error, go to Check 2.
Check 2 The HDD/SSD may be damaged. Replace it with a new one following the
instructions in Chapter 4, Replacement Procedures. If the problem still exists,
perform Check 3.
Check 3 The Main board may be damaged. Replace it with a new one following the
instructions in Chapter 4, Replacement Procedures.
2-28 [CONFIDENTIAL] Satellite M500D/M505D/M507D Maintenance Manual
To Next Page
Loading...
