3 Tests and Diagnostics
3.0.3 Executing the Diagnostic Test
To start the Test PROGRAM on USB boot disk, follow these steps:
1. Please prepare PC of Windows VISTA OS.
2. Please copy the file for creating a USB-Bootable memory to PC.
The filename of four files and one folder to copy is shown below.
a) COMMAND.COM
b) Freedos.bss
c) FreeDOSMake.exe
d) KERNEL.SYS
e) Autoexec.bat
f) Folder (USBMakingFolder)
3. Please format USB-memory in FAT mode before creating USB-Bootable memory.
4. Please copy the file prepared for USB-Bootable Memory to a USBMakingFolder.
5. And when you create USB-Bootable memory, please use only one USB-memory.
6. Run “FreeDOSMake.exe”. You can create USB-Bootable memory.
Satellite U500/PORTEGE M900D/Dynabook Maintenance Manual [CONFIDENTIAL] 3-7
To Next Page
Loading...
