3 Tests and Diagnostics
Satellite U900/U940 /945)Series Maintenance Manual
3.16 1
st
HDD Test
NOTES: HDD+SSD RAID Mode ,currently T&D can’t read and writ::
1. If the machine is with HDD and SSD, BIOS has setting automatically RAID mode for
HDD+SDD to boost Operate System, then you can’t change the RAID mode to SATA
mode.
2. In RAID mode, currently T&D program can’t read HDD/SSD information. It can’t also
Read and write test by T&D.
3. In RAID mode, You can only Press F2 to COMS check the HDD /SDD information.
4 T&D program can only test HDD/SDD in SATA mode
The HDD test allows the user to verify the 1
st
HDD ok or not. First, please select HDD test
method, Screen would display as below:
After you select the method, then input password: “hard disk”, if input password is Right, the
screen would display as below:
If input password is wrong, the screen would display as below:
To Next Page
Loading...
