4 Replacement Procedures Error! No text of specified style in document. Error! No text of
specified style in document.
4-10 Metis 10F/10FG Maintenance Manual [CONFIDENTIAL]
4.3 Memory
Removing the Optional Memory
Remove the optional memory according to the following procedures and Figures 4-2 and 4-3
after checking that the laptop is turned off.
CAUTION: Remove the optional memory after turning off the laptop. If this is violated, the
laptop or memory can be damaged.
1. Loosen the one M2.5×5 half teeth screw securing the logic lower door.
Figure 4-2 Removing the logic lower door
2. Pry up the logic lower door at mark 1 and 2 as shown in figure 4-2 and handle the door,
rotate at 45 degree then pull the lower door out.
CAUTION: Do not touch the connectors on the memory or in the laptop. Contaminated
connector can cause memory access problems.
To Next Page
Loading...
