Error! No text of specified style in document. Error! No text of specified style in document. 4
Replacement Procedures
[CONFIDENTIAL] Metis 10F/10FG Maintenance Manual 4-13
4.4 HDD
Removing the HDD
Remove the HDD (hard disk drive) according to the following procedures and Figures 4-4, 4-5
and 4-6.
CAUTION: This is push bar for Assemble HDD. Do not press on the top
or bottom of the drive. Applying such pressure can either corrupt the
data in the drive or damage the drive.
1. For H95 model: Remove two M2.5×6 screws securing the HDD door. Pry up the HDD
door from the recess area (as the arrow shown in figure) and remove it.
H95 model
To Next Page
Loading...
